PHP 8.3.4 Released!

Números enteros (Integers)

Un número entero (o integer) es un número del conjunto ℤ = {..., -2, -1, 0, 1, 2, ...}.

Véase también:

Sintaxis

Los integer pueden especificarse mediante notación decimal (base 10), hexadecimal (base 16), octal (base 8) o binaria (base 2), opcionalmente precedidos por un signo (- o +).

Los literales de tipo integer binarios están disponibles desde PHP 5.4.0.

Para utilizar la notación octal, se antepone al número un 0 (cero). Para utilizar la notación hexadecimal, se antepone al número 0x. Para utilizar la notación binaria, se antepone al número 0b.

Ejemplo #1 Literales de números enteros

<?php
$a
= 1234; // número decimal
$a = -123; // un número negativo
$a = 0123; // número octal (equivale a 83 decimal)
$a = 0x1A; // número hexadecimal (equivale a 26 decimal)
$a = 0b11111111; // número binario (equivale al 255 decimal)
?>

Formalmente, la estructura de los literales de tipo integer es:

decimal     : [1-9][0-9]*
            | 0

hexadecimal : 0[xX][0-9a-fA-F]+

octal       : 0[0-7]+

binario     : 0b[01]+

entero      : [+-]?decimal
            | [+-]?hexadecimal
            | [+-]?octal
            | [+-]?binario

El tamaño de un integer depende de la plataforma, aunque el valor usual es un valor máximo de aproximadamente dos mil millones (esto es, 32 bits con signo). Las plataformas de 64 bits normalmente tienen un valor máximo de aproximadamente 9E18, excepto en Windows antes de PHP 7, que siempre es de 32 bits. PHP no tiene soporte para el tipo integer sin signo. El tamaño de un integer se puede determinar mediante la constante PHP_INT_SIZE, y el valor máximo mediante la constante PHP_INT_MAX desde PHP 4.4.0 y PHP 5.0.5, y el valor mínimo mediante la constante PHP_INT_MIN desde PHP 7.0.0.

Advertencia

Antes de PHP 7, si a un integer octal se le proporcionaba un dígito no válido (esto es, 8 o 9), se ignoraba el resto del número. Desde PHP 7, se emite un error de análisis.

Desbordamiento de enteros

Si PHP encuentra un número fuera de los límites de un integer, se interpretará en su lugar como un valor de tipo float. También, una operación cuyo resultado sea un número fuera de los límites de un integer devolverá en su lugar un valor de tipo float.

Ejemplo #2 Desbordamiento de enteros en sistemas de 32 bit

<?php
$número_grande
= 2147483647;
var_dump($número_grande); // int(2147483647)

$número_grande = 2147483648;
var_dump($número_grande); // float(2147483648)

$millón = 1000000;
$número_grande = 50000 * $millón;
var_dump($número_grande); // float(50000000000)
?>

Ejemplo #3 Desbordamiento de enteros en sistemas de 64 bit

<?php
$número_grande
= 9223372036854775807;
var_dump($número_grande); // int(9223372036854775807)

$número_grande = 9223372036854775808;
var_dump($número_grande); // float(9.2233720368548E+18)

$millón = 1000000;
$número_grande = 50000000000000 * $millón;
var_dump($número_grande); // float(5.0E+19)
?>

No existe el operador de división de integer en PHP. 1/2 produce el float 0.5. El valor puede ser convertido a un integer redondeándolo a cero, o mediante la función round() que permite un mayor control sobre el redondeo.

<?php
var_dump
(25/7); // float(3.5714285714286)
var_dump((int) (25/7)); // int(3)
var_dump(round(25/7)); // float(4)
?>

Conversión a números enteros

Para convertir explícitamente un valor al tipo integer se puede emplear tanto (int) como (integer). Sin embargo, la mayoría de las veces la conversión no es necesaria, ya que un valor es convertido de forma automática cuando un operador, función o estructura de control requiera un argumento de tipo integer. Un valor también puede ser convertido al tipo integer mediante la función intval().

Si un resource es convertido a un integer, el resultado será el número de recurso único asignado al resource por PHP durante la ejecución.

Consulte también la Manipulación de tipos.

Desde booleanos

false producirá 0 (cero), y true producirá 1 (uno).

Desde números de punto flotante

Cuando se convierte un float a un integer, el número será redondeado hacia cero.

Si el valor de tipo float esta por debajo de los límites de un integer (normalmente +/- 2.15e+9 = 2^31 en plataformas de 32 bits y +/- 9.22e+18 = 2^63 en plataformas de 64 bits distintas de Windows), el resultado es indefinido, debido a que float no tiene la precisión suficiente para ofrecer el resultado como un integer exacto. No se mostrará ninguna advertencia, ni siquiera un aviso, cuando esto ocurra.

Nota:

A partir de PHP 7.0.0,0, en lugar de ser indefinidos y dependientes de la plataforma, NaN e Infinity siempre serán cero al amoldarlos a integer.

Advertencia

Nunca se debe convertir una fracción desconocida a un integer, ya que a veces puede conducir a resultados inesperados.

<?php
echo (int) ( (0.1+0.7) * 10 ); // ¡muestra 7!
?>

Consulte también la advertencia sobre la precisión de float

Desde cadenas de caracteres

Consulte Conversión de string a números

Desde otros tipos

Precaución

El comportamiento de la conversión de integer a otros tipos es indefinido. No confíe en ningún comportamiento observado, ya que puede cambiar sin previo aviso.

add a note

User Contributed Notes 10 notes

up
139
php at richardneill dot org
11 years ago
A leading zero in a numeric literal means "this is octal". But don't be confused: a leading zero in a string does not. Thus:
$x = 0123; // 83
$y = "0123" + 0 // 123
up
56
d_n at NOSPAM dot Loryx dot com
16 years ago
Here are some tricks to convert from a "dotted" IP address to a LONG int, and backwards. This is very useful because accessing an IP addy in a database table is very much faster if it's stored as a BIGINT rather than in characters.

IP to BIGINT:
<?php
$ipArr
= explode('.',$_SERVER['REMOTE_ADDR']);
$ip = $ipArr[0] * 0x1000000
+ $ipArr[1] * 0x10000
+ $ipArr[2] * 0x100
+ $ipArr[3]
;
?>

IP as BIGINT read from db back to dotted form:

Keep in mind, PHP integer operators are INTEGER -- not long. Also, since there is no integer divide in PHP, we save a couple of S-L-O-W floor (<division>)'s by doing bitshifts. We must use floor(/) for $ipArr[0] because though $ipVal is stored as a long value, $ipVal >> 24 will operate on a truncated, integer value of $ipVal! $ipVint is, however, a nice integer, so
we can enjoy the bitshifts.

<?php
$ipVal
= $row['client_IP'];
$ipArr = array(0 =>
floor( $ipVal / 0x1000000) );
$ipVint = $ipVal-($ipArr[0]*0x1000000); // for clarity
$ipArr[1] = ($ipVint & 0xFF0000) >> 16;
$ipArr[2] = ($ipVint & 0xFF00 ) >> 8;
$ipArr[3] = $ipVint & 0xFF;
$ipDotted = implode('.', $ipArr);
?>
up
24
dhairya lakhera
6 years ago
-------------------------------------------------------------------------
Question :
var_dump((int) 010); //Output 8

var_dump((int) "010"); //output 10

First one is octal notation so the output is correct. But what about the when converting "010" to integer. it should be also output 8 ?
--------------------------------------------------------------------------
Answer :

Casting to an integer using (int) will always cast to the default base, which is 10.

Casting a string to a number this way does not take into account the many ways of formatting an integer value in PHP (leading zero for base 8, leading "0x" for base 16, leading "0b" for base 2). It will simply look at the first characters in a string and convert them to a base 10 integer. Leading zeroes will be stripped off because they have no meaning in numerical values, so you will end up with the decimal value 10 for (int)"010".

Converting an integer value between bases using (int)010 will take into account the various ways of formatting an integer. A leading zero like in 010 means the number is in octal notation, using (int)010 will convert it to the decimal value 8 in base 10.

This is similar to how you use 0x10 to write in hexadecimal (base 16) notation. Using (int)0x10 will convert that to the base 10 decimal value 16, whereas using (int)"0x10" will end up with the decimal value 0: since the "x" is not a numerical value, anything after that will be ignored.

If you want to interpret the string "010" as an octal value, you need to instruct PHP to do so. intval("010", 8) will interpret the number in base 8 instead of the default base 10, and you will end up with the decimal value 8. You could also use octdec("010") to convert the octal string to the decimal value 8. Another option is to use base_convert("010", 8, 10) to explicitly convert the number "010" from base 8 to base 10, however this function will return the string "8" instead of the integer 8.

Casting a string to an integer follows the same the logic used by the intval function:

Returns the integer value of var, using the specified base for the conversion (the default is base 10).
intval allows specifying a different base as the second argument, whereas a straight cast operation does not, so using (int) will always treat a string as being in base 10.

php > var_export((int) "010");
10
php > var_export(intval("010"));
10
php > var_export(intval("010", 8));
8
up
11
ganlvtech at qq dot com
3 years ago
Be aware of float to int cast overflow

<?php

// You may expected these
var_dump(0x7fffffffffffffff); // int(9223372036854775807)
var_dump(0x7fffffffffffffff + 1); // float(9.2233720368548E+18)
var_dump((int)(0x7fffffffffffffff + 1)); // int(9223372036854775807)
var_dump(0x7fffffffffffffff + 1 > 0); // bool(true)
var_dump((int)(0x7fffffffffffffff + 1) > 0); // bool(true)
var_dump((int)'9223372036854775807'); // int(9223372036854775807)
var_dump(9223372036854775808); // float(9.2233720368548E+18)
var_dump((int)'9223372036854775808'); // int(9223372036854775807)
var_dump((int)9223372036854775808); // int(9223372036854775807)

// But actually, it likes these
var_dump(0x7fffffffffffffff); // int(9223372036854775807)
var_dump(0x7fffffffffffffff + 1); // float(9.2233720368548E+18)
var_dump((int)(0x7fffffffffffffff + 1)); // int(-9223372036854775808) <-----
var_dump(0x7fffffffffffffff + 1 > 0); // bool(true)
var_dump((int)(0x7fffffffffffffff + 1) > 0); // bool(false) <-----
var_dump((int)'9223372036854775807'); // int(9223372036854775807)
var_dump(9223372036854775808); // float(9.2233720368548E+18)
var_dump((int)'9223372036854775808'); // int(9223372036854775807)
var_dump((int)9223372036854775808); // int(-9223372036854775808) <-----

?>

These overflows are dangerous when you try to compare it with zero, or substract it from another value (e.g. money).
up
17
egwayjen at gmail dot com
6 years ago
"There is no integer division operator in PHP". But since PHP 7, there is the intdiv function.
up
16
Anonymous
17 years ago
To force the correct usage of 32-bit unsigned integer in some functions, just add '+0' just before processing them.

for example
echo(dechex("2724838310"));
will print '7FFFFFFF'
but it should print 'A269BBA6'

When adding '+0' php will handle the 32bit unsigned integer
correctly
echo(dechex("2724838310"+0));
will print 'A269BBA6'
up
9
litbai
8 years ago
<?php
$ipArr
= explode('.', $ipString);
$ipVal = ($ipArr[0] << 24)
+ (
$ipArr[1] << 16)
+ (
$ipArr[2] << 8)
+
$ipArr[3]
;
?>
1. the priority of bit op is lower than '+',so there should be brackets.
2. there is no unsighed int in PHP, if you use 32 bit version,the code above will get negative result when the first position of IP string greater than 127.
3. what the code actually do is calculate the integer value of transformed 32 binary bit from IP string.
up
18
rustamabd@gmail-you-know-what
17 years ago
Be careful with using the modulo operation on big numbers, it will cast a float argument to an int and may return wrong results. For example:
<?php
$i
= 6887129852;
echo
"i=$i\n";
echo
"i%36=".($i%36)."\n";
echo
"alternative i%36=".($i-floor($i/36)*36)."\n";
?>
Will output:
i=6.88713E+009
i%36=-24
alternative i%36=20
up
11
Anonymous
9 years ago
Converting to an integer works only if the input begins with a number
(int) "5txt" // will output the integer 5
(int) "before5txt" // will output the integer 0
(int) "53txt" // will output the integer 53
(int) "53txt534text" // will output the integer 53
up
3
Jacek
17 years ago
On 64 bits machines max integer value is 0x7fffffffffffffff (9 223 372 036 854 775 807).
To Top